Tabletop 8.5 Laser Finishing System

Arrow laser die-cut, any-cut is post-processing equipment for roll-to-roll type of small batch label printing. You can cut labels using a laser by controlling via desktop PC. In addition, it has functions of laminating, coating, and scrap paper removal which greatly improves productivity. any-cut is much faster than knife cutting thanks to the laser. It does not have an limitation on the location of the label, minimizing the loss of media and is cost-free for tooling, saving operating cost. any-cut works best with any-001 providing a more efficient and easy label printing system.

  • 5,000 labels can be cut within one hour with no retooling.
    Without retooling for cutting, 5,000 labels can be cut within one hour.
  • The combination of the latest laser technology and vision system guarantees the quality of labels.
    Cutting can be performed at precise locations through a small laser beam and a vision system. In addition, consistent levels of label quality can be guaranteed by minimizing the errors that occur during cutting.
  • Time and costs can be reduced by performance that serves a triple purpose.
    A single cutting can perform laminating and the removal of scrap paper simultaneously. Laminating films can increase durability by protecting the surface of labels and enhance the level of luster. In addition, final labels can be conveniently produced through the removal of scrap paper.
  • You will become an expert with only a short-term training.
    Fast and easy cutting is realized through the simple installation of roll labels and our custom software.
  • Production is possible without concerns about space.
    any-cut does not require a large space. It can be installed in a small space and cutting can be done whenever necessary.
  • Cutting and marking can be performed simultaneously.
    In cutting labels, necessary information such as barcodes, numbering, QR codes, date and time can be directly marked on the labels through an exclusive software program.
  • Full and half cuts can be performed simultaneously.
    Various cutting tasks can be produced within a single label printing operation.
  • Various media in terms of thickness and type are supported.
    As the laser can set up the degree of cutting by fine control of intensity and speed, labels can be cut in various patterns in the medium as desired by users.
  • Long labels can also be cut at one time.
    Labels with a maximum length of 1.2m can also be cut by our software.
  • Labels with highly complex images can also be cut speedily.
    Various images ranging from simple rectangles and circles to complex cuts such as stamp shapes can be executed easily and speedily.
  • Concerns over consumable costs such as the replacement of knife edges are no longer necessary.
    In the case of die cutting using knives, the abrasion of knife edges requires frequent replacements. However, any-cut does not incur consumable replacement costs.
Dimensions and Weight
Faster output, faster delivery
Interface and Software
SoftwareAdditional functions are provided, including full and half cuts, sheet die cutting, marking, QR codes, barcodes, and numbering
Electrical Specifications
Rated Voltage110-220v
Power Consumption
Environmental Conditions
Physical Size
Max Web WidthMedium rolls with a maximum width of 215mm can be used
Max Web Speed18m/m
Fast label die cutting is possible
Max Roll DiameterMedia rolls with a maximum diameter of 300mm can be used (max)
Active Cutting Areawidth 200mm x 1200mm
Very long labels can also be cut at once
Spot SizeElaborate work is enabled with a small laser beam
Laser Source(10.57 - 10.63 um)
The die cutting of papers and film are enabled by using a CO2 laser source
Life of laserElaborate work is enabled with a small laser beam
CoolingAs no separate cooling device is necessary, the product can be used even in small spaces
Compact Size(D1620 x W630 x H503 mm / 190 kg)
It can also be used in small spaces or offices
OptionsSupporting "on the fly"
Label cutting can be done faster