10″ Colour HMI/PLC featuring Formech Cycle View (FCV)
Wago control system with 10″ colour touch screen, real time adjustments, 1% heater increment control, Formech Cycle View and 40 preset memories.
Assembly to hold reel materials.
Plug Assist with Speed Regulator
Pneumatically powered plug assist forces the heated material into the tool cavities to increase the thickness of material at the bottom of the cavities.
Ceramic heaters are well suited for high volume production when heaters are engaged for long periods and constant temperature must be maintained.
16 Independently Controllable Heating Zones
Sixteen heating zones provide rapid heat response with a greater range of control to form challenging shapes and materials.
Pneumatic Heater Drive
Heavy duty pneumatically powered heater travel provides precise and rapid heater deployment, whilst braking prevents element damage.
Pneumatically Powered Clamping Frame
Pneumatically powered clamping system that provides powerful and effortless control.
Pneumatic Table with Regulator
Precise table speed control.
Table Height Adjust
Table height adjust shortens the tool table travel when using shallow tools and reduces cycle time.
Pre-stretch enables the user to pump air into the heated sheet, creating a bubble to avoid thinning of material with deeper tools.
Avoids material sag during the heating cycle and maintains an even distance between heater and sheet whilst providing the user with an audible indication the material is ready to form.
Vacuum Flow Regulator
Precisely regulates vacuum flow rate when a greater level of control is required with demanding applications.
Vacuum Receiver Tank
A vacuum tank that provides instant stored vacuum, for high demanding materials and shortening cycle times.
Vacuum & Pressure Gauges
A visual indication of consistent vacuum and pressure being applied (pressure in Hg / bar).
Safety Light Curtain
Protects users from accidental injury by halting all mechanical actions when light curtain is broken.
Twin Cooling Fan System
Overhead gantry and twin 550W fans to cool formed material and shorten cycles times.
0 Ring Clamp Seal with Milled Recess
The silicone ‘O’ ring is inserted into a milled recess that runs all around the edge of the forming aperture. The plastic sheet is then placed on top of the seal and the clamping frame is brought down to clamp the material tightly as the ‘O’ ring is compressed.
Oil filled rotary vane pump 21m3 / hr
Multi User Pin Access Control
The supervisor of the machine can choose and determine a level of access for the different operators.